The Minuteman Enclosed Workbench is a stand alone bench against a wall or a Center workstation placed in the middle of a workshop. As a centerpiece, it can be modified to have the worktop centered on the frame and the backsplash sent unattached, allowing for work to be performed around the workstation.
For quite sometime we have had requests for an enclosed workstation. We initially built them by special order since all of our benches are handmade and this application takes more time to build within our current pipeline. Assembly is quit easy since the panels and doors are applied to a normal workbench structure. We are currently producing two popular sizes, 30"x 60" with 3-12" W x 20" D Drawers and 30"x 72" with 4-12" W x 20" D Drawers.
The top is Maple Butcher Block 1.75" thick. All Panels are handmade with Dense select Southern Yellow Pine, using very decorative tongue and grove paneling. There is room for one or two inside shelves depending on the custom height that you choose. Drawers are our standard 12" x 20" euro birch with Nickel hardware. Weight is 440 lbs.
Legs, Frames, and Bottom shelves are honed from 2” x 8” Dense Select Southern Yellow Pine. This wood type is highly resistant to wear; therefore, it is suitable for Post & Beam Homes, Flooring, Decks, Patios, Marinas, Boardwalks and other high-traffic applications.
The 1 3/4 " rock-hard edge grain construction of our Wood Welded Butcher Block Top assures you of the maximum durability and the greatest construction strength available. Tops are finished with DURAKRYL 102. This tough, acrylic coating will repel alcohol, bleach, even paint thinner! These tops are hard at work in factories and on shipping and receiving docks around the world. In the material handling business there is no better top than a solid Laminated Wood Welded Maple Butcher Block.
Height: 35” Industry Standard, however you choose your height.
Weight: 310 - 412 LBS
Capacity: 1,500 Pounds*
Included: Bench Top, Rear Backsplash 1” x ¾” x Bench Width, 6 – Legs w/ adjustable Leg Levelers, Drawers, Back Panel, Side Panels, Two Front Cabinet Doors and Bottom Shelf.
The Top is specified at 30"x 72" or 30” x 60". 1-3/4" Thick!!! Legs are 3.5" x 3.5" and are cut from 2" x 8" stock, cross grained and laminated to prevent future twisting as would likely happen with 4" x 4" cut stock.
A Standard Bench height is 35" tall with Adjustable Leg Levelers. However you can choose your own custom height! Legs can be made to your specified height at no charge. This opportunity is available for taller or shorter clients to create a more comfortable work environment, as well as accommodating for a variety of project styles to enhance your work!
Sixteen Lag Bolts, Eleven Lag/Deck Screws (see assembly).
Average Assembly time is 20 minutes.
Handmade 3 compartment side pocket and 1 - 6 " Ratchet Clamp to assist in assembly (included).
* Capacity with even weight distribution.
- Additional Options
- Related products are not available.
Questions For Us?
Write Your Own Review
You may also be interested in the following product(s)
MSRP : $499.95
Buy American Sale : $479.95
- MSRP : $289.00
MSRP : $79.00
Buy American Sale : $39.00
MSRP : $99.00
Buy American Sale : $89.00
- MSRP : $459.00
MSRP : $179.95
Buy American Sale : $169.95